|

3/4" Black Cap 10pk Maker Emt
Finish off every project the easy way with these Maker Pipe Conduit End Caps. These durable black plugs press straight into 3/4 In. EMT conduit, sealing the open tube to keep out dirt and moisture. They cover up and protect the ends of conduit that might have a sharp edge. A light tap with a hammer seats them in place for a clean, snag-free finish that also helps protects floors. UV-stable plastic stands up to outdoor weather, while the 10-pack gives you plenty to reuse and swap as your build evolves.
Seals the open tube to keep out dirt and moisture Covers the end of the conduit to protect from sharp edges
View Details
|
560446 |
3/4" Black Cap 10pk Maker Emt |
48 |
4.99 |
/ PK |
860013879150 |
|
|

3/4"emt Straight Coupler Maker
The Maker Pipe Structural Coupling Connector lets you turn ordinary 3/4 In. EMT conduit into strong frames and projects. The connector clamps firmly around two pieces of conduit to form an end to end joint. Two steel pieces fit together like a puzzle and are easily positioned anywhere on your build. Use a single 5mm hex wrench to make the connection or take it apart whenever you need. The zinc coated steel resists rust and is great for outdoor or indoor builds. Reuse the fitting over and over to build anything from garden enclosures to garage workbenches.
View Details
|
558865 |
3/4"emt Straight Coupler Maker |
36 |
5.49 |
/ EA |
860013879143 |
|
|

3/4" Emt 45-connector Maker
The Maker Pipe 45-Degree Connector lets you turn ordinary 3/4 In. EMT conduit into strong frames and projects. The connector clamps firmly around two pieces of conduit to form a 45-degree joint or angled brace. Two steel pieces fit together like a puzzle and are easily positioned anywhere on your build. Use a single 5mm hex wrench to make the connection or take it apart whenever you need. The zinc coated steel resists rust and is great for outdoor or indoor builds. Reuse the fitting over and over to build anything from garden enclosures to garage workbenches.
View Details
|
537776 |
3/4" Emt 45-connector Maker |
40 |
5.49 |
/ EA |
860013879136 |
|
|

3/4" Emt 90-connector Maker
The Maker Pipe 90-Degree Connector lets you turn ordinary 3/4 In. EMT conduit into strong frames and projects. The connector clamps firmly around three pieces of conduit to form a 90-degree joint or corner. Two steel pieces fit together like a puzzle and are easily positioned anywhere on your build. Use a single 5mm hex wrench to make the connection or take it apart whenever you need. The zinc coated steel resists rust and is great for outdoor or indoor builds. Reuse the fitting over and over to build anything from garden enclosures to garage workbenches.
View Details
|
531755 |
3/4" Emt 90-connector Maker |
25 |
5.99 |
/ EA |
860013879129 |
|
|

3/4"emt 180-connector Maker
The Maker Pipe 180-Degree Connector lets you turn ordinary 3/4 In. EMT conduit into strong frames and projects. The connector clamps firmly around three pieces of conduit to form a 180-degree joint or cross. Two steel pieces fit together like a puzzle and are easily positioned anywhere on your build. Use a single 5mm hex wrench to make the connection or take it apart whenever you need. The zinc coated steel resists rust and is great for outdoor or indoor builds. Reuse the fitting over and over to build anything from garden enclosures to garage workbenches.
View Details
|
522335 |
3/4"emt 180-connector Maker |
24 |
5.49 |
/ EA |
860013879112 |
|
|

3/4" Emt T-connector Maker
The Maker Pipe T Connector lets you turn ordinary 3/4 In. EMT conduit into strong frames and projects. The connector clamps firmly around two pieces of conduit and forms a 90-degree joint or elbow. Two steel connector pieces fit together like a puzzle and are easily positioned anywhere on your build. Use a single 5mm hex wrench to make the connection or take it apart whenever you need. The zinc coated steel resists rust and is great for outdoor or indoor builds. Reuse the fitting over and over to build anything from garden enclosures to garage workbenches.
View Details
|
507057 |
3/4" Emt T-connector Maker |
49 |
3.99 |
/ EA |
860013879105 |
|
|

Ice Maker Kit
Everything you need to connect the water supply line to your ice maker. Includes 25' of 1/4" O.D. polyethylene tubing, 1 each 1/4" union, 2 each 1/4" delrin sleeves, 2 each 1/4" brass inserts, and 1 each self-tapping saddle valve to fit 3/8" to 1-3/8" O.D. tubing or pipe. Carded.
View Details
|
406961 |
Ice Maker Kit |
2 |
17.49 |
/ EA |
34015 |
|